H20 beam supporting head

Supporting head is used for helping attache an additional prop to the H20 beam, to support and stabilize H20 timber beams.
www.horizonformwork.com
sales@horizonform.com

Props in compliance with European rules

Adjustable props for supporting work in slab building construction, with working height range from 1.7m up to 3,00-5,50 m.
The inner tube and outer tube is alternative from Ø 48.3mm , 57mm, 60.3mm, 76mm, etc.
Both internal thread and external thread are available.

HORIZON FORMWORK CO. LTD.
www.horizonformwork.com
sales@horizonform.com

4-Way Head for Supporting Wood Beams In Slab Formwork

The 4-Way serves to keep the Primary beam in position and protects the H20 Timber Beam from falling down.
There are two using ways when supporting H20 beams: longitudinal and transversal.
One single beam can go throug in longitudinal direction and two beams can go in transversal direction. The fork head can hold beams and is secured to the steel prop with a lock pin.
www.horizonformwork.com
sales@horizonform.com

Removable Folding Tripod

The removable folding tripod makes it easier to set up the tubular steel props during erection of slab formwork system. The prop is simply set in the open stand and secured with the clamping hook with a gentle blow of the hammer. The tripods can be used with all types of props.
The flexibly mounted supporting legs of the tripod permit an optimal fit, even in the corners of the structure.
www.horizonformwork.com
sales@horizonform.com