Telescopic Push Pull Brace for Wall Formwork

Telescopic Push-Pull Brace for Supporting Wall Formwork Systems

The available lengths of the push-pull braces are from 1.3m to 10m.

Quick adjustment
Working length adjustment can be carried out within seconds. The required adjustment needs only a few turns of the push-pull brace.

Very simple operation on site
All the push-pull braces can be handled on site for assembly.

Easy supporting assembly
For easy assembly to the formwork panels and ground, the Push-Pull brace base plate adapter and the connector head are used. In this way, the push-pull braces can be safely and quickly installed and dismantled from the ground.

www.horizonformwork.com, www.slabformworksystems.com
sales@horizonform.com

Adjustable Screw Jack for Scaffolding System

Manufactured from both solid bar and tube, in mild steel and hi-tensile steel, Jack base & U-head are widely used in various scaffolding systems for adjusting working height.
48mm x 800mm x 5mm for Base Jack & U-Head Jack

www.horizonformwork.com, www.slabformworksystems.com
sales@horizonform.com

H20 beam supporting head

Supporting head is used for helping attache an additional prop to the H20 beam, to support and stabilize H20 timber beams.
www.horizonformwork.com
sales@horizonform.com

Props in compliance with European rules

Adjustable props for supporting work in slab building construction, with working height range from 1.7m up to 3,00-5,50 m.
The inner tube and outer tube is alternative from Ø 48.3mm , 57mm, 60.3mm, 76mm, etc.
Both internal thread and external thread are available.

HORIZON FORMWORK CO. LTD.
www.horizonformwork.com
sales@horizonform.com

4-Way Head for Supporting Wood Beams In Slab Formwork

The 4-Way serves to keep the Primary beam in position and protects the H20 Timber Beam from falling down.
There are two using ways when supporting H20 beams: longitudinal and transversal.
One single beam can go throug in longitudinal direction and two beams can go in transversal direction. The fork head can hold beams and is secured to the steel prop with a lock pin.
www.horizonformwork.com
sales@horizonform.com

Removable Folding Tripod

The removable folding tripod makes it easier to set up the tubular steel props during erection of slab formwork system. The prop is simply set in the open stand and secured with the clamping hook with a gentle blow of the hammer. The tripods can be used with all types of props.
The flexibly mounted supporting legs of the tripod permit an optimal fit, even in the corners of the structure.
www.horizonformwork.com
sales@horizonform.com

Spring Rapid Clamp for Fastening Tie bar

Spring Rapid Clamp for Fastening Tie bar

Spring rapid clamp is a very easy and effective way for securing and fastening tie bars in light formwork applications. The tensioner tool is used to pull the tie bar through the clamp.
Tie bars with diameters from 5-10mm can pass through the spring clips.
sales@horizonform.com

Cam Clamp for Locking and Securing Formwork

Cast Iron Cam Clamp for Locking and Securing Formwork
sales@horizonform.com

Base Jacks with ACME Trapezoidal Screws for Scaffold Systems

Base Jacks with ACME Trapezoidal Screws for Scaffold Systems

Made from high strength steel pipes, screw jack base is used to support and stabilize scaffoldings in construction. It can fit to frames, ringlock and cuplock systems.
Jack heads are always working in conjunction with Jack base to level scaffolding sets in a easy way.

sales@horizonform.com
www.horizonformwork.com